View CLD-DS41_4522630.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CLD-DS41 rev 1a product family data sheet cree ? xlamp ? xt-e leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description xlamp xt- e is crees highest performing silicon carbide-based le d technology, delivered in crees industry-standard xp/xt packaging. xt- e white sets the new standard for high performance and dramatically lowers system cost. xt- e royal blue is crees highest performing source of royal blue light for remote-phosphor applications. cree xlamp l e ds bring high performance and quality of light to a wide range of lighting applications, including remote- phosphor, color-changing, portable and personal, outdoor, indoor- directional, transportation, stage and studio, commercial and emergency-vehicle lighting. features ? available in white, 80-cri min white, 70-min cri white and royal blue ? binned at 85 c ? cool white effcacy of up to 148 lm/w (@ 85 c, 350 ma) ? royal blue wall plug effciency of up to 53% (@ 85 c, 350 ma) ? wide viewing angle: 115-140 ? thermal resistance: 5 c/w ? maximum drive current: 1.5 a ? e lectrically neutral thermal path ? v f binning supported for xt-e white and royal blue ? xt- e royal blue sorted into 2.5-nm-wavelength bins ? unlimited foor life at 30 oc/85% rh ? refow solderable - jedec j-std-020c compatible ? rohs- and reach-com pliant table of contents cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 product characteristics ............... 2 flux characteristics ................... 2 relative spectral power distribution ............................... 4 relative flux vs. junction temperature ............................. 5 e lectrical characteristics ............. 6 relative flux vs. current ............ 6 relative chromaticity vs. temperature and current ............ 8 typical spatial distribution .......... 9 thermal design ........................ 10 refow-soldering characteristics . 10 notes ...................................... 11 mechanical dimensions .............. 12 tape and reel .......................... 13 packaging ................................ 14 note: for remote phosphor applications, a separate license to certain cree patents is required.
2 2 product characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 5 viewing angle (fwhm) - white degrees 115 viewing angle (fwhm) - royal blue degrees 140 temperature coeffcient of voltage mv/c -2.5 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 1500 reverse voltage v 5 forward voltage (@ 350 ma, 85 c) v 2.85 3.4 le d junction temperature c 150 flux characteristics - white (t j = 85 c) the following table provides several base order codes for xlamp xt- e white le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xt- e binning and labeling document. color cct range base order codes minimum luminous flux @ 350 ma (lm) calculated minimum luminous flux (lm)* order code min. max. group flux (lm) 700 ma 1500 ma cool white 5,000 k 8,300 k r5 139 247 420 xteawt-00-0000-000000h51 r4 130 231 393 xte awt-00-0000-000000g51 r3 122 217 369 xte awt-00-0000-000000f51 outdoor white 4,000 k 6,200 k r5 139 247 420 xteawt-00-0000-000000he3 r4 130 231 393 xte awt-00-0000-000000ge3 r3 122 217 369 xte awt-00-0000-000000fe3 neutral white 3,700 k 5,000 k r3 122 217 369 xte awt-00-0000-00000lfe4 r2 114 203 354 xte awt-00-0000-00000lee4 q5 107 190 324 xte awt-00-0000-00000lde4 70 cri minimum neutral white 3,700 k 5,000 k r3 122 217 369 xte awt-00-0000-00000bff5 r2 114 203 354 xte awt-00-0000-00000bef5 q5 107 190 324 xte awt-00-0000-00000bdf5 notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements. ? typical cri for neutral white, 3700 k - 5000k cct is 75. ? typical cri for warm white, 2600 k - 3700 k cct is 80. ? calculated fux values are for reference only xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
3 3 color cct range base order codes minimum luminous flux @ 350 ma (lm) calculated minimum luminous flux (lm)* order code min. max. group flux (lm) 700 ma 1500 ma 80 cri minimum white 2,600 k 4,300 k q5 107 190 324 xteawt-00-0000-00000hde7 q4 100 178 302 xteawt-00-0000-00000hce7 q3 93.9 167 284 xteawt-00-0000-00000hbe7 warm white 2,600 k 3,700 k q5 107 190 324 xte awt-00-0000-00000lde7 q4 100 178 302 xte awt-00-0000-00000lce7 q3 93.9 167 284 xte awt-00-0000-00000lbe7 70 cri minimum warm white 2,600 k 3,700 k r2 114 190 324 xte awt-00-0000-00000bee7 q5 107 178 302 xte awt-00-0000-00000bde7 q4 100 167 284 xte awt-00-0000-00000bce7 notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements. ? typical cri for neutral white, 3700 k - 5000k cct is 75. ? typical cri for warm white, 2600 k - 3700 k cct is 80. ? calculated fux values are for reference only flux characteristics - royal blue (t j = 85 c) the following table provides order codes for xlamp xt- e royal blue le ds. additional information on the performance grouping and codes for xt- e royal blue le ds can be found in the xt-e binning and labeling document. dwl kit codes dominant wavelength range order codes, minimum radiant flux @ 350 ma, t j =85 c min. max. dwl (nm) dwl (nm) 475 mw 500 mw 525 mw 550 mw 01 d36 450 d57 465 xteary-00-0000-000000k01 xte ary-00-0000-000000l01 xte ary-00-0000-000000m01 xte ary-00-0000-000000n01 02 d36 450 d47 460 xteary-00-0000-000000k02 xte ary-00-0000-000000l02 xte ary-00-0000-000000m02 xte ary-00-0000-000000n02 03 d46 455 d57 465 xte ary-00-0000-000000k03 xte ary-00-0000-000000l03 xte ary-00-0000-000000m03 xte ary-00-0000-000000n03 04 d36 450 d37 455 xte ary-00-0000-000000k04 xte ary-00-0000-000000l04 xte ary-00-0000-000000m04 xte ary-00-0000-000000n04 05 d46 455 d47 460 xte ary-00-0000-000000k05 xte ary-00-0000-000000l05 xte ary-00-0000-000000m05 xte ary-00-0000-000000n05 06 d56 460 d57 465 xte ary-00-0000-000000k06 xte ary-00-0000-000000l06 xte ary-00-0000-000000m06 xte ary-00-0000-000000n06 07 d37 452.5 d46 457.5 xte ary-00-0000-000000k07 xte ary-00-0000-000000l07 xte ary-00-0000-000000m07 xte ary-00-0000-000000n07 08 d47 457.5 d56 462.5 xte ary-00-0000-000000k08 xte ary-00-0000-000000l08 xte ary-00-0000-000000m08 xte ary-00-0000-000000n08 09 d37 452.5 d56 462.5 xte ary-00-0000-000000k09 xte ary-00-0000-000000l09 xte ary-00-0000-000000m09 xte ary-00-0000-000000n09 note: cree maintains a tolerance of 7% on fux and power measurements xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
4 4 relative spectral power distribution - white relative spectral power distribution - royal blue relative spectral power 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) 5000k - 8300k cct 2600k - 3700k cct relative spectral power 0% 20% 40% 60% 80% 100% 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) royal blue xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
5 5 relative luminous flux vs. junction temperature (i f = 350 m a) - white relative radiant flux vs. junction temperature (i f = 350 m a) - royal blue relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative radiant flux junction temperature (oc) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
6 6 electrical characteristics (t j = 85 c) relative luminous flux vs. current (t j = 85 c) - white electrical characteristics (tj = 85oc) 0 200 400 600 800 1000 1200 1400 1600 2.50 2.75 3.00 3.25 3.50 forward current (ma) forward voltage (v) relative intensity vs. current (tj = 85oc) 0% 50% 100% 150% 200% 250% 300% 350% 0 200 400 600 800 1000 1200 1400 1600 relative luminous flux (%) forward current (ma) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
7 7 relative radiant flux vs. current (t j = 85 c) - royal blue relative radiant flux vs. current (tj = 85oc) 0% 50% 100% 150% 200% 250% 300% 350% 0 200 400 600 800 1000 1200 1400 1600 relative radiant flux (%) forward current (ma) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
8 8 relative chromaticity vs. current and temperature (warm white) relative chromaticity vs. current, ww - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 1000 1200 1400 1600 current (ma) ccx ccy t j = 85 c relative chromaticity vs. temperature ww - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 20 40 60 80 100 120 140 160 tsp ( c) ccx ccy i f = 350 ma xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
9 9 typical spatial distribution - white typical spatial distribution - royal blue typical spatial radiation pattern 0 20 40 60 80 100 120 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) typical spatial distribution 0 20 40 60 80 100 120 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
10 10 thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. reflow soldering characteristics in testing, cree has found xlamp xt-e leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min thermal design 0 200 400 600 800 1000 1200 1400 1600 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
11 11 profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3 c/second max. 3 c/second max. preheat: temperature min (ts min ) 100 c 150 c preheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. notes lumen maintenance projections please read the xlamp long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note for details on how thermal de - sign, ambient temperature, and drive current affect the l e d junction temperature. moisture sensitivity in testing, cree has found xlamp xt-e leds to have unlimited foor life in conditions 30 oc/85% relative humidity (rh). moisture testing included a 168-hour soak at 85 oc/85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. cree recommends keeping xlamp l e ds in their sealed moisture-barrier packaging until immediately prior to use. cree also recommends returning any unused l e ds to the resealable moisture-barrier bag and closing the bag immediately fter use. rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with e u directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim warning: do not look at exposed lamp in operation. e ye injury can result. see led e ye safety at www.cree.com/ products/pdf/xlamp_e yesafety.pdf. xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
12 12 mechanical dimensions all measurements are .13 mm unless otherwise indicated. top view bottom view side view recommended pcb solder pad recommended stencil pattern (shaded area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
13 13 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) 12.0 +.3 -.0 1.75 .10 4.1 8.1 2.5.1 1 / 1 3.000 a 2402-00014 xp hew loading spec -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd end start user feed direction cathode side anode side user feed direction 7" 1.5 .1 13mm pocket tape carrier tape size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
14 14 packaging cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # xlamp xt-e leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011-2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.

▲Up To Search▲

Price & Availability of CLD-DS41

	To Download CLD-DS41 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .